WL-KG-1C infrared motion sensor

WL-KG-1C infrared motion sensor

Description                                                                                                         

The product is a new saving-energy switch, it adopts good sensitivity detector, integrated circuit and SMT. It gathers automatism, convenient safe, saving-energy and practical functions. Three detectors inside compose a wide range detection field, it utilizes the infrared energy from human as control-signal source, it can start the load at once when one enters detection field. It  can identify day and night automatically. It is easy to install and used widely, possessing the functions of power show and detecting show. 

Specification                                                                                                     

Power source:               220V/AC-240V/AC   100V/AC-130V/AC

Power frequency:          50-60HZ

Time –delay:  min:         8±3secmax: 7±2min                           

Detection angle:           360º

Ambient light:               <3LUX-daylight

Working temperature:  10-32℃         

Detection distance(22℃): 8m max.dia.(KG-1B)

Rated load:                  1200W (220-240V/AC)  800W  (110V/AC)  3000W(220-240V/AC) 1500W (110V/AC)                

Power consumption:     0.45W(static 0.1W)

Installation height:        >3m

Detection motion speed:  0.6-1.5m/s

Working humidity:        <93%RH

Switch Function:          Auto/Off/Manual Override                                

16m.max.dia.（KG-1C)

Function                                                                                                         

* Identify day and night automatically. can adjust ambient light according to your desire: when turn to SUN(max), it will work in the daytime and at night. when turn to MOON(min), it will only work under less than 3LUX circumstance. as for adjustment, please refer to testing way.

* Detection distance can be set according to installation position and detection field.

* The power show and detection show: he indictor lamp will flash one time each 4 seconds after switching on the power, and flash two times per second when receiving the signal. At the same time, it shows the sensr in the normal detection conditions.

* Time-delay adjustment: it can be set according to your desire. The minimum is 8+/-3 sec; the maximum is 7+-2min.

* Locking function: during working, when power is shut off 2 seconds and then on, the sensor will be locked automatically and keep load working continually(for example it will always lighting). and shut off the power for 4 seconds and then on, sensor will resume automation.

NOTES:                                                                                                               

Ø  Should be installed by electrician or experienced man.

Ø  Avoid installing it on the unrest objects

Ø  There shouldn’t be hindrance and moving object in front of the detection window effecting detection.

Ø  Avoid installing it near air temperature alteration zones such as air condition, central heating, etc.

Ø  Considering your safety, please don’t open the cover when you find the hitch after installation.

Ø  If there is difference between product and instruction, please refer to product mainly.

SOME PROBLEM AND SOLVED WAY                                                                  

Ø  The load don’t work:

a.     Please check the power and load connect is correct.

b.    Check if show lamp flash with one time every 5 seconds.

c.     Check if the load is good.

d.    Check if the show lamp accelerates its speed after detecting.

e.    Check if the working light corresponds to the ambient light.

Ø  The sensitivity is poor

a.     Please check if there is hinder in front of the detection window to effect receiving the signals.

b.    Please check if the ambient temperature is too high.

c.     Please check if the signals source is in the detection fields.

d.    Please check if the installation height corresponds to the height showed in the instruction.

e.    Please check if the moving orientation is correct.

Ø  The sensor can’t shut the load automatically.

a. Check if there are continual signals in the detection fields.

b. Check if the time delay is set to the longest.

c. Check if the power corresponds to the instruction.

d. Check if the temperature change obviously nears the sensor, such as air condition or central heating etc.

e. Check if it is in locked conditions.

FAQ                                                                                                                   

Q 1. what's the payment term?  

A. We accept TT,30% deposit and 70% balance agaisnt copy of BL

Q 2. how's the delivery time ?

A. usually it will take about 3-7 days for production

Q 3. tell me the standard of package?

A. Export standard carton box

Q 4.Could you offer Form A or C/O ?  

A. It totally not a problem. We can prepare relative documents to forgin affairs office or other office to apply for this certificate.

Q 5.Would you accept to use our logo ?

A.If you have good quantity,it absolute no problem to do OEM.

Q 6.We want to know month capacity.  

A. It depends on which model.For example for M12 type normal type, month capacity can reach near 20000pcs.

Q 7.Where is your market?

A. Our products are popular in Russia, Indonisia, Philippines,Italy, America, Brazil and so on.Some of them are our regular customers and some of them are developing. We hope you can join us and make mutural benifit from our cooperation.

Welcome to the advisory!